Categories

Weed Control on gravel paths

What organic options are available to control weeds on gravel paths

Introduction

The issue of weeds on gravel paths and driveways is often a difficult issue for organic gardeners who do not wish to use chemical herbicides such as glyphosate. Having moved to a house in the Borders with such a driveway I have been experimenting with various methods for the last couple of years and I thought that a summary of my conclusions might be useful to others.

The weeds that I have had to deal with are mostly the common ones of dandelions, bitter cress, docks, buttercup and willowherbs. The other really persistent weed is pearlwort which is a low growing plant that looks almost like moss but has substantial roots.

Methods

There are 2 basic methods of controlling unwanted plants growing in gravel paths. These are chemical, where a substance is applied that will kill off the plants, and physical, where elimination is achieved by removal of the plant or inflicting enough damage to kill the plant.

Chemical

There are a few chemicals that are deemed acceptable for organic gardeners to use. I have tried two.

  1. Pelargonic Acid. Following a question at a recent BOG Gardeners Question Time the use Pelargonic Acid was suggested. This is available as a commercial product although it is relatively expensive. It should be used with caution as it can cause eye irritation. I found it effective but only on small non-woody weeds with shallow roots. It was not effective against Pearlwort for instance, as although it killed the top growth, the plants soon re-grew from the roots. I would not recommend this as a solution except for small areas of weed that are difficult to control by other methods, such as tight corners.
  2. Salt. This is cheap, readily available and surprisingly effective. It is not really suitable for regular use across large areas as you need to be aware of where any run off goes and whether this might affect neighbouring flower beds etc. I restrict its use to deep rooted weeds such as dandelions where a small heap of salt in the centre of the rosette of leaves kills off the plant completely in a few days. Timing of application is important. The salt requires a small amount of moisture to work so applying it on damp days or in light drizzle is ideal.  Avoid applying it before heavy rain or else it will be washed off into a solution that is too dilute to be effective.

Physical

  1. Weeding! The obvious solution is simply removing the weeds by hand but this is tedious and time consuming if the area to be dealt with is large. However, it is the most effective method if you can remove the weeds before they seed. Where we had large areas of expansive Pearlwort we resorted to this solution and overcame the boredom factor by simply weeding an area for a maximum of 15 mins a day, every day. It was surprising how soon the larger area was covered.
  2. Heat. The problems of weeds in paths existed before modern herbicides were invented and traditionally one method of control was the use of a flame gun. This simply desiccates and then burns the top growth of the weeds, including seeds. This method does not kill off the roots so any substantial weeds are likely to regrow, although repeated use will eventually weaken and kill them.  Obviously care needs to be taken with such tools as there is a real danger of setting light to nearby vegetation, fences, buildings etc! I always have a hosepipe to hand.

The traditional flame gun was fuelled by paraffin and these are still available with the main manufacturer being Sheen.  These are fearsome tools as well as being smelly and dirty to use. Once running they provide a large intense source of heat and sound like a jet engine. They can clear a large area of ground surprisingly quickly.

A more modern solution is a Calor gas fuelled heat gun. I have found these to be just as effective and much cleaner and safer to operate. The downside is that your mobility is somewhat restricted by the gas bottle and tubing to the flame gun

Prevention

Slowing down the colonisation of the weeds on the paths in the first place would be beneficial but I have not found this to be very easy. Some suggestions are :

  • Deep gravel. Ensuring there is a good layer of gravel without soil helps prevent weeds getting a foothold. Simply applying additional gravel a few centimetres deep on top of what you have in place, can help.
  • Foot traffic. Traffic on the path will stop most weeds growing so you might consider abandoning control on paths that are little used. They will soon become ‘grass paths’ although with an underlying hard gravel surface. This is what has happened now to most of the main paths in our vegetable growing area and these are mown when required.
  • Prevent seeding. If your path is beside grass or flower beds then it helps to ensure that the plants in these adjacent beds do not go to seed as this is likely to be shed onto the gravel of the path which makes an ideal seed bed. Keep the grass cut at the edge and the plants dead headed
  • Vegetation. Choose your weeds! You could grow attractive plants in the gravel that will help to smother and out compete the weeds. I have had limited success with this as weeds do still grow amongst the cultivated plants where they are then more difficult to spot and control.

Conclusions

There is no easy answer and the solution will depend on your particular situation. In our case the use of the flame gun 3 or 4 times a year combined with judicious use of salt on specific problematic weeds and a fair bit of hand weeding does seem to keep the gravel clear of weeds for most of the time.